Access Point Tenda W12 V2.0 AC1200

W12 V2.0 AC1200 Dual Band Gigabit In-Wall Access Point Model W12 Category In-wall Dimension 86*86*32mm Interface One 10/100/1000 Mbps Ethernet Port One 10/100/1000 Mbps Ethernet Port (PoE) Button 1*Reset LED Indicator 1*SYS Maximum Power Consumption 7.3W Power Supply PoE 802.3af Max. Number of Clients 256 Recommended Clients 35 Antenna 4dBi+4dBi 2.4GHz maximum power 18+/-1.5dBm 5GHz maximum power 17+/-1.5dBm Reception Sensitivity 2.4GHz 802.11b -88dBm 2.4GHz 802.11n (MCS7) -72.5dBm 5GHz 802.11a -92.5dBm 5GHz 802.11n (MCS7) -72dBm Frequency Range 2.4GHz&5GHz Standard&Protocol IEEE 802.11b/g/n/ac(wave2) Maximum wireless speed 2.4GHz:300Mbps 5GHz:867Mbps Bandwidth 20MHz/40MHz/80MHz Operating Mode AP/Client+AP Max. No. of SSID 2.4GHz: 6 5GHz: 4 Hide SSID Supported OFDMA Supported Beamforming Supported Fast roaming（802.11k/v/r） Supported WEP Supported WPA-PSK Supported WPA2-PSK Supported WPA Supported WPA2 Supported Access control Supported Adjustable power transmit Supported Automatic channel Supported AP isolation Supported Guest network Supported Connected clients control Supported RSSI Threshold Supported Weak signal terminal elimination Supported Prioritize 5 GHz Supported VLAN tagging for SSID Supported LED control Supported MU-MIMO Supported Diagnostics tool Supported Reboot at specified interval Supported Scheduled reboot Supported System Logs Supported Device management M3 or Tenda Router with AP Controller feature Firmware upgrade Supported Reboot Supported Reset Supported Backup configuration Supported Restore configuration Supported Default IP 192.168.0.254 Default username admin Default password admin Operation Temperature -10℃ ~ 45℃ Operating Humidity 10%~90% non-condensing Storage Temperature -30℃ ~ 70℃ Storage Humidity 5%~90% non-condensing